Stacking Crab Crane with Walkway & Cabin for Warehouse
Stacking cranes, also known as stacker cranes, are a type of material handling equipment widely used in warehouses and distribution centers for efficient storage and retrieval of goods. These cranes a
Stacking cranes, also known as stacker cranes, are a type of material handling equipment widely used in warehouses and distribution centers for efficient storage and retrieval of goods. These cranes are typically used in high-rise warehouses where space is at a premium and the storage of goods is done in pallets or containers.
The primary function of a stacking crane is to move the goods between the storage racks and the loading or unloading stations. This is done by means of a series of horizontal and vertical movements, which are controlled by the crane's operator. The crane is mounted on rails, which allows it to move along the length of the warehouse, and it is equipped with a lifting mechanism that can raise and lower the load as needed.
No. | ITEM | TECHNICAL PARAMETER |
1 | Rated lifting capacity | Main lifting(grab): 16t aux. hook:5t |
2 | Working class | A6 |
3 | Grab volume | 6m³ |
4 | Rail level | ~13.50m |
5 | Lifting height | Grab: ~19m |
6 | Aux.: ~19m | |
7 | Span | South water granulated slag |
8 | North water granulated slag | |
9 | Long travel length | ~50m |
10 | Power source | 3 phase A.C. 380V 50Hz |
11 | Crane power supply mode | Steel sliding wire( opposite cabin room) |
12 | Motor protection class | IP54 |
13 | Operation environment | Outdoor, Steam, Strong corrosion |
14 | Control mode | Cabin+remote control+central control room |
15 | Long travel speed | 7.5~110 m/min |
16 | Cross travel speed | 4.3~43.5 m/min |
17 | Lifting speed | 4.2~42 m/min |
19 | Others | 1. Grab's open-close direction should be perpendicular to the main girder 2. All motors apply inverter motor, fitted with frequency inverter and inverter control electrical room. 3. Fitted with crane positioning system, include lifting mechanism positioning encoder, grab open-close positioning encoder,long travel and cross travel positioning encoder, related proximity switch. 4. Wire rope fitted with tension meter. 5. Grab should be fitted with weighting device(electronic scale) 6. The crane can be controlled and operated in smart mode 7. Grab should be fitted with sway control service 8. Crane's total width should be ≤8m |
